Hot Melt Waxing

Pedal Passion, Brisbane's Premier Destination for Custom Built Bikes and Value-Added Servicing

Bike Chain Waxing
Discover professional chain waxing with Silca's hot melt system at our Brisbane bike workshop. Enhance durability, reduce friction, and enjoy smoother, quieter performance cycling.

Chain waxing isn't a gimmick or a trend.

It's a proven method used by serious cyclists who want a cleaner drivetrain, longer component life, and the most efficient transfer of power possible.

A freshly waxed chain is something every cyclist should experience at least once. The quietness, smoothness, and cleanliness are immediately noticeable—and the long-term benefits only get better from there.

We do sell new chains that are waxed ready from us or we can help to clean and wax your existing chain. Our standard wax solution is by using Silca Secret Blend with Endurance Chip to ensure your chain will last at least 500km in dry weather in Brisbane before needing to rewax. Different blends can be provided upon request.

Note: We will inspect your existing chain before performing a waxing service. Chains that show significant wear are not suitable for waxing, and it is not recommended to begin a waxed‑chain system with a worn chain. In these cases, starting with a fresh, unworn chain is the correct approach for optimal performance and longevity.

Benefits of Chain Waxing

Smoother and more efficient drivetrain performance

  • Cleaner drivetrain with minimal grime build-up
  • Reduced chain wear and elongation
  • Extended cassette and chainring life
  • Quieter operation
  • Less maintenance between rides
  • Improved shifting consistency
  • Ideal for road, gravel, and endurance cycling

Once riders experience a properly waxed chain, many never return to traditional lubricants.

Complete Chain Preparation

Before waxing, the chain undergoes a thorough cleaning and decontamination process to remove:

  • Factory grease
  • Existing lubricants
  • Dirt and contaminants
  • Embedded drivetrain residue

This critical step allows the wax to properly bond to the chain's internal surfaces.

If you use a different brand of chain such as KMC, SUMC, YBN or any brands that are not mentioned.

Please consult us to see what is the best result of waxing we can provide.
 

What Riders Ask
What are some pros and cons of traditional oil lubricants?

Advantages of Oil:

  • Quick and easy application
  • No special equipment needed
  • Good performance in wet conditions
  • More forgiving of application technique
  • Can be topped up without cleaning

Disadvantages (especially in hot Queensland conditions):

  • Attracts dust and creates abrasive paste
  • Degrades in extreme heat
  • Requires more frequent cleaning
  • Chains wear faster due to contamination
What is the waxing process and why you should invest in a professional application?

Initial Setup:

  • Clean chain thoroughly (multiple cycles may be needed). At Pedal Passion we use ultrasonic cleaning
  • Remove all factory lubrication
  • Allow chain to dry completely
  • Prepare wax pot with appropriate amount of wax

Waxing:

  • Melt wax completely (use double boiler method if needed)
  • Lower chain into melted wax
  • Agitate chain to ensure complete coverage
  • Remove chain and let excess wax drip off
  • Hang chain to cool and solidify
  • Once cool, flex chain to break up excess wax

Re-Waxing:

  • Clean chain in melted wax (no need for solvent cleaning)
  • Repeat waxing process
  • Typically takes 15-20 minutes after initial setup
  • Much faster than first waxing

Not Sure what your bike needs? No problem!
Just book a free general assessment and bring your bike in