SRAM AXS Disc Hood Covers Black RED Force D1 Hydraulic

SRAM AXS Disc Hood Covers Black RED Force D1 Hydraulic

$46.00 USD
Skip to product information
SRAM AXS Disc Hood Covers Black RED Force D1 Hydraulic
  • SRAM AXS Disc Hood Covers Black RED Force D1 Hydraulic
  • SRAM AXS Disc Hood Covers Black RED Force D1 Hydraulic
SRAM AXS Disc Hood Covers Black RED Force D1 Hydraulic

SRAM AXS Disc Hood Covers Black RED Force D1 Hydraulic

$46.00 USD
Shipping calculated at checkout.

The SRAM Force AXS Disc Hood Covers are genuine replacement rubber hoods designed to refresh worn SRAM Force or RED eTap AXS hydraulic road levers, restoring grip, comfort, hand support and a clean cockpit feel for road, gravel and endurance bikes ridden in Brisbane, Queensland and Australian conditions.

SRAM AXS Disc Hood Covers Features

  • Genuine SRAM replacement hood covers for compatible eTap AXS hydraulic brake/shift levers
  • Restores hand comfort, grip and brake lever control on worn or damaged hoods
  • Ergonomic shape supports multiple hand positions on road and gravel rides
  • Black finish gives a clean factory look on SRAM AXS cockpits
  • Smart low-cost service upgrade for improving ride feel without replacing the whole lever

(more product details...)

SKU: SRAM-HOOD-COVERS-ETAP
Barcode: 710845825903
loading inventory data..

Earn 0 points on this purchase.

Learn more
Key Features & Technical Specifications

Technical Specifications

  • Product Name: SRAM Force AXS Disc Hood Covers
  • Product Type: Replacement hydraulic road lever hood covers
  • Compatibility: SRAM Force / RED D1 Hydro shifter-brake levers
  • System Type: SRAM eTap AXS hydraulic road levers
  • Hood Type: Hydraulic lever hood cover
  • Colour: Black
  • Material: Flexible rubber / synthetic hood cover compound
  • Package: Pair of hood covers
  • Recommended Use: Road cycling, gravel cycling, endurance road, racing, commuting, trainer bikes and cockpit servicing
  • Best Bike Type: Road bikes, aero road bikes, endurance bikes, gravel bikes and all-road bikes using compatible SRAM AXS hydraulic levers
  • Installation Type: Slip-on replacement hood cover
  • Main Upgrade Purpose: Replace worn, sticky, torn, stretched, faded or damaged lever hoods
  • Workshop Service Use: Bar tape replacement, lever service, cockpit refresh, crash repair and drivetrain/brake service

Compatibility Notes

  • These hoods are designed for compatible SRAM Force / RED AXS hydraulic brake-shift levers.
  • They are not universal hood covers and should not be fitted to Shimano, Campagnolo, mechanical SRAM, rim brake SRAM or incorrect-generation AXS levers.
  • Confirm exact lever generation before ordering.
  • Professional installation is recommended if the hoods are being replaced together with bar tape, brake bleeding or shifter service.
Notable Tech, Materials & Construction

Genuine SRAM Lever Hood Fit

These hood covers are shaped to match the ergonomic body of compatible SRAM AXS hydraulic levers. A correct hood fit is important because poorly fitting aftermarket hoods can bunch, loosen, twist or interfere with lever access.

Ergonomic Hand Support

The hood shape is designed to support common road riding hand positions, including cruising on the hoods, climbing seated, climbing out of the saddle, braking from the hoods and riding over rough surfaces.

Textured Grip Surface

The rubber surface helps improve grip with bare hands or gloves. This is especially useful in hot and humid conditions where sweat can make old hoods feel slippery.

Flexible Rubber Construction

The hood material is flexible enough to install over the lever body while remaining secure once seated correctly. This helps preserve the original lever feel and appearance.

Factory Cockpit Refresh

Replacing worn hood covers can make a bike feel significantly newer. Old hoods can become shiny, sticky, stretched, faded or torn, especially after long-term use, indoor trainer sessions, sweat exposure or frequent wet-weather riding.

Works Well With Bar Tape Replacement

Hood covers are often replaced during a full cockpit refresh. New hoods paired with fresh bar tape can improve grip, hygiene, comfort and the overall presentation of the bike.
Size, Fit, Geometry & Measurements

Fit Details

  • Designed For: Compatible SRAM Force / RED D1 Hydro eTap AXS levers
  • Application: Left and right hydraulic brake/shift lever bodies
  • Colour: Black
  • Package Format: Pair
  • Lever Type: Road / gravel hydraulic brake-shift levers

Fit Recommendation

Before fitting, confirm:

  • Exact SRAM lever model
  • Lever generation
  • Hydraulic road lever compatibility
  • Hood condition on both left and right levers
  • Whether bar tape also needs replacing
  • Whether brake bleeding or lever inspection is required

Installation Notes

  • Roll the old hood forward and remove carefully.
  • Clean sweat, dirt and residue from the lever body.
  • Check for crash damage, loose lever hardware or corrosion.
  • Fit the new hood evenly over the lever body.
  • Ensure all tabs and edges are seated correctly.
  • Re-check brake and shift button access before riding.
Who it is best suited for and where it is best suited

The SRAM Force AXS Disc Hood Covers are best suited to riders wanting to restore cockpit comfort, grip and control on compatible SRAM AXS hydraulic road or gravel bikes.

Best Suited For

  • SRAM Force AXS riders replacing worn hoods
  • SRAM RED AXS riders with compatible hydraulic levers
  • Road cyclists refreshing a premium cockpit
  • Gravel riders dealing with dusty or sweaty hoods
  • Riders replacing crash-damaged hood covers
  • Indoor trainer users with sweat-worn lever hoods
Industry Feedback, Rider Reviews and our own opinion

The key industry takeaway is simple: genuine replacement hoods are the safest and cleanest option when restoring lever comfort and fit on compatible SRAM AXS hydraulic road controls.

Rider Feedback & Community Sentiment

Rider feedback around SRAM replacement hoods is generally positive, especially from cyclists refreshing older AXS cockpits.

Common positive rider comments include:

  • Makes worn levers feel new again
  • Restores grip on sweaty or shiny hoods
  • Improves hand comfort on long rides
  • Better finish than stretched or torn old hoods
  • Good upgrade when replacing bar tape
  • Helpful after crashes or bike transport damage
  • Genuine SRAM fit feels more secure than generic options
  • Low-cost way to improve cockpit feel

Some riders note that installing hoods can take patience because the rubber needs to stretch over the lever body evenly. This is normal and careful installation helps avoid tearing or misalignment.
Product Care & Warranty Info

Product Care

  • Wipe hoods regularly with a damp cloth.
  • Avoid harsh solvents, degreasers or alcohol-based cleaners.
  • Remove sweat and sunscreen residue after hot rides.
  • Check hoods for tears, looseness or distortion during servicing.
  • Replace if the rubber becomes sticky, shiny, cracked or stretched.
  • Inspect after crashes or bike transport damage.
  • Avoid using tyre levers or sharp tools when installing.
  • Replace bar tape at the same time for the cleanest cockpit refresh.
  • Keep indoor trainer bikes clean, as sweat can accelerate rubber wear.
  • Have a mechanic inspect the lever body if the hood has been damaged in a crash.

Warranty Information

  • Warranty coverage is subject to SRAM or retailer terms and conditions.
  • Warranty generally applies to manufacturing defects in materials or workmanship.
  • Normal wear, sweat damage, crash damage, incorrect installation, tearing during fitting, chemical damage and cosmetic wear are generally not covered.
  • Correct compatibility and careful installation are essential.
  • Professional installation is recommended if replacing hoods during a full road bike service, brake service or bar tape replacement.
Stock Reference
Product SKU
  • Default Title: SRAM-HOOD-COVERS-ETAP
Barcode (GTIN/EAN)
  • Default Title: 710845825903

No articles found for the tag "SRAM".

View All Posts